Description
Lens Hood II (Compatible with both UWL-95 C24 M67/UWL-95 C24 M52)
Set-up image
A lens hood for the UWL-95 C24 M67/UWL-95 C24 M52 wide conversion lens.
Using the Lens Hood II can block unnecessary light coming from outside of combined lens coverage to suppress flare/ghost likely happen when shooting in backlight.
Also attaching the Lens Hood II can protect lens surface and lens frame from accidental damage.
No vignetting at wide end both on land and underwater when installing the Lens Hood II on the UWL-95 C24 series lenses.
※Confirmed camera housings
Sony MPK-URX100A, Olympus PT-059, PT-058, PT-056
Please note that other housings have not been confirmed by INON and may have vignetting depending on combination and condition.
■Outer diameter: φ114mm (4.5in)
■Length: [standalone] 53mm (2.1in)
■Weight: [standalone] 54g (1.9oz) [air] / approx.8g (0.3oz) [underwater]
*Not usable together with "Dome Lens Unit III" .
■M67 Type1 Screw Ring for UWL-95 C24
JAN Code：4562121439764
A set of a threaded mount ring for the UWL-95 C24 M67 Type1 and fixing screws to replace with worn original screw ring or to convert screw ring from Type2 to Type1. Also installing this screw ring on the UWL-95 C24 M52 will convert the lens to UWL-95 C24 M67 Type1.
If you have any difficulty to remove original fixing screw(s) due to salt-build-up etc, do not proceed any further and consult your purchasing dealer for advice.
■M67 Type2 Screw Ring for UWL-95 C24
JAN Code：4562121439771
A set of a threaded mount ring for the UWL-95 C24 M67 Type2 and fixing screws to replace with worn original screw ring or to convert screw ring from Type1 to Type2. Also installing this screw ring on the UWL-95 C24 M52 will convert the lens to UWL-95 C24 M67 Type2.
If you have any difficulty to remove original fixing screw(s) due to salt-build-up etc, do not proceed any further and consult your purchasing dealer for advice.
■Compatible camera system (as of April, 2020)
A housing with a lens port of 6 mm/0.2 in or less distance between lens port edge and lens port surface.