Inon UW Tripod Hub
Rated 3.5/5 based on 11 customer reviews

Inon UW Tripod Hub

Available: In Stock
Wishlist
  • Product SKU: 4562121438682
  • Category: INON
$320.00

UW Tripod Hub

●Make Your Own Underwater Tripod

 
The UW Tripod Hub is designed to use INON ”Carbon Telescopic Arm SS/S/M/L” or ”Stick Arm XS-T/SS-T/S-T/M-T” as tripod legs supporting wide range of tripod applications.
The UW Tripod Hub is equipped with 1/4 tripod screw to add "UW 3-Way Panhead" or head part of variety of Shoe Base products (*2). Usable as a simple tripod by attaching underwater housing directly.

(*2) Compatible Shoe Base products are "Shoe Base 1/4-20UNC" and "Shoe Base M6" as their head part can be separated. Those head parts are available in the market.

 
 
■UW Tripod Hub [Leg mount] Compatibility
Stick Arm XS-T/SS-T/S-T/M-T
Carbon Telescopic Arm SS/S/M/L
 
■UW Tripod Hub [Screw mount] Compatibility
(1/4-20UNC screw)
UW 3-Way Panhead
Tripod Adapter for D Holder
Shoe Base 1/4-20UNC Head
Shoe Base M6 Head
Single Light Holder LF for Tripod
Single Light Holder LE for Tripod
Tripod Adapter
SD Mount Cage for HERO3/3+/4
SD Front Mask STD (with packaged "Mount Adapter")
SD Front Mask for HERO5/6/7 (with packaged "Mount Adapter ")
SD Mount Base for TG-Tracker (with packaged "Mount Adapter")
SD Mount Base UWH1 (with packaged "Mount Adapter")
An underwater housing equipped with "1/4-20UNC" tripod screw hole (screw hole depth 5mm or deeper).


●Three Opening Angles


Each leg mount is equipped with a "Lock Lever" to lock leg position at either of [high], [middle] or [low] positions. Each leg can be set to different opening angles to make an elevator column vertical even in uneven or rough sea ground.
Friction when opening/closing legs can be adjusted by tightening/loosening fixing bolts on joints.


●Center Column Type Elevator


The center column type elevator consists of two parts. Removing lower elevator enables to put combined camera position down close to the ground when opening angle is set to low position.
Remove the Lower Elevator Column You can get lower height. Extra "Lower Elevator" can be jointed on the original Lower Elevator to extend total height at 145mm/5.7in.
It is also possible to hang down a camera system by attaching the elevator upside-down for extremely low angle shooting or shooting a subject just underneath of the tripod.


●2-Way Ferrule (rubber/spike)


Bundled "2-Way Ferrule" offers two configurations either rubber or spike tip. Ferrules are to be screwed on ball-joints on tripod leg edges. Turning rubber parts upwards will have spike tips to accommodate to different circumstances.


●More Stability with Weight


There are several options to enhance stability of the tripod system including hanging a dive weight from the strap hole or jointing a dive weight by using a ball-joint on a tripod leg besides using a stone bag.

UW Tripod Hub

●Make Your Own Underwater Tripod

 
The UW Tripod Hub is designed to use INON ”Carbon Telescopic Arm SS/S/M/L” or ”Stick Arm XS-T/SS-T/S-T/M-T” as tripod legs supporting wide range of tripod applications.
The UW Tripod Hub is equipped with 1/4 tripod screw to add "UW 3-Way Panhead" or head part of variety of Shoe Base products (*2). Usable as a simple tripod by attaching underwater housing directly.

(*2) Compatible Shoe Base products are "Shoe Base 1/4-20UNC" and "Shoe Base M6" as their head part can be separated. Those head parts are available in the market.

 
 
■UW Tripod Hub [Leg mount] Compatibility
Stick Arm XS-T/SS-T/S-T/M-T
Carbon Telescopic Arm SS/S/M/L
 
■UW Tripod Hub [Screw mount] Compatibility
(1/4-20UNC screw)
UW 3-Way Panhead
Tripod Adapter for D Holder
Shoe Base 1/4-20UNC Head
Shoe Base M6 Head
Single Light Holder LF for Tripod
Single Light Holder LE for Tripod
Tripod Adapter
SD Mount Cage for HERO3/3+/4
SD Front Mask STD (with packaged "Mount Adapter")
SD Front Mask for HERO5/6/7 (with packaged "Mount Adapter ")
SD Mount Base for TG-Tracker (with packaged "Mount Adapter")
SD Mount Base UWH1 (with packaged "Mount Adapter")
An underwater housing equipped with "1/4-20UNC" tripod screw hole (screw hole depth 5mm or deeper).


●Three Opening Angles


Each leg mount is equipped with a "Lock Lever" to lock leg position at either of [high], [middle] or [low] positions. Each leg can be set to different opening angles to make an elevator column vertical even in uneven or rough sea ground.
Friction when opening/closing legs can be adjusted by tightening/loosening fixing bolts on joints.


●Center Column Type Elevator


The center column type elevator consists of two parts. Removing lower elevator enables to put combined camera position down close to the ground when opening angle is set to low position.
Remove the Lower Elevator Column You can get lower height. Extra "Lower Elevator" can be jointed on the original Lower Elevator to extend total height at 145mm/5.7in.
It is also possible to hang down a camera system by attaching the elevator upside-down for extremely low angle shooting or shooting a subject just underneath of the tripod.


●2-Way Ferrule (rubber/spike)


Bundled "2-Way Ferrule" offers two configurations either rubber or spike tip. Ferrules are to be screwed on ball-joints on tripod leg edges. Turning rubber parts upwards will have spike tips to accommodate to different circumstances.


●More Stability with Weight


There are several options to enhance stability of the tripod system including hanging a dive weight from the strap hole or jointing a dive weight by using a ball-joint on a tripod leg besides using a stone bag.

SHIPPING

Following are the terms and conditions that constitute our Shipping Policy. Domestic Shipping Policy Shipment processing time All orders are processed within 1-2 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. Shipping rates & delivery estimates Shipping charges for your order will be calculated and displayed at checkout.

RETURNS POLICY

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer's policies. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non refundable. If you receive a refund, the cost of return shipping will be deducted from your refund. Contact Us If you have any questions on how to return your item to us, contact us

We will not entertain returns as a result of change of heart or other matters besides defects.